Standard Balancing Machines

Whether you have a standard rotor that can be balanced with single-plane correction or a part that requires two-plane balancing with segmentation, we can find the best solution for your balancing machine requirements. We can work with individual parts, components, or systems of components, and we offer static and dynamic balancing machines.

Hines offers more than 50 standard dynamic balancing machine models and hundreds of specialized balancing equipment configurations including robotics, conveyors, and lasers. Hines balancing machines are capable of balancing more than 100 parts per hour while holding the tightest tolerances. Hines engineering and manufacturing expertise can assist you with a balancing equipment package to meet the most demanding balancing applications.

The balancing machine model that is right for your application depends on the attributes (including size, weight, change of shape when rotating) and variety of the parts that will be balanced, throughput requirements, and other details about your manufacturing process.

Available Tolerances

  • All Hines balancing machines measure and display force unbalance (where the amount of unbalance can be measured within 1 plane)
  • All of the machines (except the non-rotating HVS), will measure and display dynamic unbalance, two plane unbalance, and force unbalance. Force and couple unbalance are available upon request.
  • Segmentation is a standard on all Hines machines. The unbalance is broken down, or vectored, to accommodate limited areas of correction. An example is a fan with five (5) blades, or another part with locations for correction which are limited and symmetrical.

Dynamic Balancing Applications

  • Vertical balancing machines (HVR) and (HVS) are typically used for balancing flat or plate shaped rotors
  • Horizontal Cradle (HC) balancing machines are also referred to as universal balancing machines for the wide variety of part shapes it can balance and the fact that it provides single or two plane balancing
  • Horizontal balancing machines (HO) are used for single and two plane, dynamic balancing
  • Driveshaft (DL) balancing machines are used for shaft type parts
 

Customer Showcase

"Prior to getting the first 2 Hines balancers, we liked the interface on our 2 competitor Y balancers but we had to recomp every 15 minutes. We found out the Hines balancers are the best of them all by far. We have purchased additional Hines balancers since them. We rarely need any service. When service has been required, Hines had taken care of us."

Jack, Founder, Hessaire Products

Not Finding what you're looking for? Let us help. Click here or Call (734) 769-2300.