Flywheel Balancing Machine

Flywheels HVR100SaThe machine pictured on the right is a Hines dynamic vertical balancing machine (HVR) configured and tooled for balancing flywheels.

Features include:

  • Single Plane, 500 lb. capacity, hard suspension balancing.
  • Transfer: A set of input roller conveyors on a lift is used to manually load the workpiece onto the machine. The part is slid onto the machine by the operator and onto the elevator. The elevator lowers the flywheel onto the tooling. Once the part is measured, the lift will raise the part off the tooling and the operator slides it off of the machine.
  • Correction: A manually activated vertical drill with automatic drill return
Linergy HVR1000SAflywheels

The balancing machine pictured here is a fully-automatic flywheel balancing machine. A flywheel is automatically chucked and balance cycle initiated automatically. When balance reading is determined, the flywheel is rotated to the first correction location. The drill automatically positions over the flywheel and the correction hole is drilled (repeat for additional hole locations). Disallowed drill locations are programmed and will not drill in these locations. After correction, the audit balance spin occurs automatically and a passed flywheel will be automatically lifted to load/unload position.

These are just a couple examples of the many configurations and weight ranges available.

Other Links:                             


Customer Showcase

"Our Hines balancer is working wonderfully for us. Your people have been very helpful when we do have a service need. The machine has served us well. Everybody has been very helpful and very prompt when we had a problem."


Latest News

Virtual Balancing Training on October 19
See All News From Hines

Not Finding what you're looking for? Let us help. Click here or Call (734) 769-2300.